over 100,000 user reviews and research-intensive expert opinions.

Home /  Home Maintenance / How Often Should a Pool be Replastered?
last_updated_date Last updated: October 4, 2022

Grab the best Home Warranty deals from the top rated companies


How Often Should a Pool be Replastered?

PUBLISHED: January 24, 2019 6 MINS READ

When it comes to your pool, you should set aside a budget to replaster your pool. Ideally, you should white coat your pool once every ten years. In this time, you should have more than enough money to make fixes and give your pool some welcome updates.

How Often Should a Pool be Replastered?
But it depends on the type of pool that you have and how often it would be replastered. There are factors that a pool owner would consider when looking to replaster or resurface the swimming pool. You should know when and why you should replaster the pool. All-in-all there are two reasons for replastering your swimming pool:

  1. Aesthetic Reasons to Replaster the PoolAesthetic Reasons to Replaster the Pool
    Usually, you would plaster your pool based on the look and feel. Acid washing can remove stains but this can be used to a certain extent. Pool plaster can reduce stains as much as possible and it’s a natural product. Pool owners are very particular about the look of the pool, especially when the lights are turned on.
    If the pool plaster stains are mineral in nature, then you can get copper and iron stains. It can be a real pain to plaster the pool, only to have the stains return due to the mineral problem or the copper heat exchanger or piping that is not addressed.Stains on plaster arise from the mix and application of the white coat. Pool plaster is a mixture of marble dust and white portland cement. But the variations in the temperature, speed of application and mix can affect its final white appearance. Also, there are a ghosting or lightning marks with slight variations due to shading and hue from a slightly different mix.Another important aspect is the feel of the plaster which should be smooth and soft. There is an aggressive water chemistry or use of strong acid washing can create pits and pocks in the plaster surface. This is called etching where the plaster with the pitting feels a bit rough to the skin and this can cut swimsuits and algae and dirt can get fixed to this. Etching can be also caused by poor plastering procedures especially when there is too hot of a mix and too much calcium used during the cold weather. You should be careful while sanding rough plaster as it can cause widespread etching.
  2. Structural Reasons to Replaster the Pool: You should know that plaster is not structural but it acts as a waterproof layer between the pool water and the shell of the pool. Plastered pools are usually made of Shotcrete or Gunite. Older pools were made with poured concrete walls or even cinder blocks. The materials are porous and water leaks through them. Applying a layer of plaster on tops allows it to breathe and it protect any reinforced beam of steam from rusting Plaster is the waterproofing layer that is important to the integrity of an inground pool structure.You can patch small spots where the gunite is beneath with plaster. Spots at the tie line or inside the skimmer can also be patched up to protect the concrete beneath the plaster. If there several thin or bare spots, you should ensure that you plaster the entire pool so that there is a uniform result. Plastering patches looks like patched plaster and this would not match the original color. Plaster is normally translucent in thin layers and if it is darker then it is due to the gunite showing through and this would give an indication that the area needs patchwork.

Keep An Eye Out For These Signs

Here are the main signs that you should look out for before you go ahead and plaster your pool:

  1. Mineral Stains

    Over a period of them, there are certain minerals in the water like iron and copper that may stain the plaster and ruin the look of your pool. Whenever this happens, it means that its time to replace it. But these stains usually show up only a few years after your replastered and you would have to locate the source of the stains.
  2. Gunite ShowsThere are several pools that are constructed with Shotcrete or Gunite and these are concrete like substances that form the structural support of the basin. The plastic over the top acts like a waterproof layer that provides a visual appeal. This means that when you see these patches of darker material showing through the plaster then its time to replaster.
  3. Uncomfortable SwimmingUncomfortable Swimming
    When you are swimming, you would get scratched or roughened when you step out of the pool. Also, you could get scratched or your swimsuit could get torn with the jagged plaster. If it’s unpleasant to run your hand along the side of the pool or climb up the stairs then its because your plaster is wearing thin.
  4. Rough SurfacesAt times, you could see the rough surfaces and not feel the physical effects of the plaster peeling away. You can make this out when dirt begins to gather in the cracks or the pitted parts and patchy spots. This means that you have to replaster immediately when this appears.

How to Replaster the Pool

Connect with plastering companies in your area, learn about the start-up procedures and don’t try doing it on your own. There are a science and art of plastering pools properly. If it’s not done well then you risk bond failure, shading, etching and crazing and all things that go wrong with plaster with your pool. They can replaster small fountains and your pool needs to be replastered quickly. Plaster crews usually work for four hours from start to finish and run a full plastering truck and work with a five-member crew to complete work on a 40,000-gallon pool. You should know that the best time to replaster is when the weather is cool and humid and this would help with the drying before you get a chance to fill the pool.

Are There Alternatives to Replastering?

  1. Patching

    The first thing you can do is patch your pool when you notice rough areas and places where the plaster is worn out. But this is a temporary solution as they cannot match plaster.
  2. Acid WashAcid Wash
    Another quick fix that works with stains but not much for plaster that wears away is acid washing. The problem with it is that plaster wears away faster as it takes off the stained layer. You should acid wash for aesthetic purposes. This costs anywhere from $2 to $4 per square foot.
  3. TileAcid Wash

    Tiling a pool is a fantastic decision. Why? This is because compared to the other choices it lasts forever as long as you maintain it well. It looks lovely and you can get creative and come up with some amazing designs. The only downside is that it is really expensive at $75-$100 per square foot.
  4. PaintPaint
    Earlier, pool builders would use paint that was designed for underwater and other chemicals that would be added to it and the extremes of temperature. A repaint could cost anywhere of $5,000. This makes it cheaper to paint a pool and looks just as good. But according to averages, a replastering job of a 1088 square feet job would cost $4352.

Importance of a Home Warranty

Why worry about finding fixing the pool and getting the right contractor to take care of your needs? With a pool, there are several issues that crop up. It could be as simple as changing the pool lights, upgrading the filter and ensuring that you can enjoy a lovely swim in the pool. After a few years, there are some appliances and systems that get worn out due to wear and tear. This could burn a hole in your pocket with the number of expenses that would crop up. Regardless of how big or small, all of these expenses add up and it could eat in your life savings and make it hard for you especially if anyone is going through a rough patch or the costs are simply too much to handle.

A home warranty is a perfect way to put your mind at ease. A technician would be there to come and fix your problem for you. Your appliances and systems would be fixed based on the coverage. In order to ensure that you get the right appliances covered, you should ensure that these are items that you regularly use and items which are expensive to repair. It should be a mix of expensive, daily appliances and systems. Also, most used systems and appliances and others that make a huge impact on your life under your home warranty plan.

The best part of a home warranty is that it not only covers repairs but also replacements. This means that appliance and systems that have broken down and cannot work and deemed irreparable can be replaced. This is where the home warranty is one way in the right direction for the homeowner. As they would get a replacement with a device of the same power and efficiency. Without a home warranty, you would have to shell out thousands of dollars for several replacements.

Use the Home Maintenance Calculator

Haven’t decided about the home warranty? Then you should try the home maintenance calculator and it will help put your mind at ease. There are several factors that you need to determine before you go ahead and buy into a home warranty. You can determine this by moving the bar to the approximate age of your appliance and the age of your home. This will give you a clear understanding of the costs involved. Here, you would have a clear understanding of the out of pocket costs as compared to a simple home warranty plan. This would save you a ton of money.

Signing Up For a Home Warranty

Now that you have determined that you would like to go ahead with a home warranty, you should then opt for a free home warranty quote. . Look through home warranty plans based on your city or even after reading the rankings and reviews. After looking through the reviews, you can get to know about genuine feedback of home warranty customers. Here they would give you a detailed review based on their experiences. The best thing that you can do is look at the top home warranty companies and find one that meets all the check boxes in your criteria before you sign up for the right one. American Home Shield does offer comprehensive coverage and is one of the top 10 home warranty companies.  The price range of home warranties cost between $300 to $500 and a service call fee of $50 to $175.

Did you find this article helpful?   helpful yes icon | helpful no icon  

Thank you for your feedback!